| Standard | High-Speed | |
|---|---|---|
| Max output | 250 packs per min | 400 packs per min |
| Product Width | 30mm – 70mm | 30mm – 70mm |
| Product Height | 10mm – 40mm | 10mm – 30mm |
| Product Length | 45mm – 150mm | 35mm – 70mm |
| Product width + height | <125mm | <125mm |
| Wrapper cutoff length | 85mm – 200mm | 130mm – 205mm |
| Max reel width | 280mm | 280mm |
| Max reel diameter | 340mm | 340mm |
| The data above is a general guideline. Actual production speed will depend upon product size and characteristics, proficiency of feeding, and wrapper characteristics. The production speed will also be lower than mechanical speed stated above if one or more factors are close to the range limits. | ||
- All ball bearings lubricated & sealed for life-time use
- Special design fin seal compartment with 3-fin roller/wheel unit (1 cold, 2 heated )
- Special jaw profile for high integrity sealing
- Temperature control of sealing units through PLC
- Dwell adjustment in running condition
- Food contact parts from stainless steel and food grade plastics
- Transparent jaw guards with safety interlock
- System to stop machine in open jaw condition
- “Rapid response” onsite production support availability
- Training In-plant/Off-site availability
- Positive wrapper feed drive
- Registered auto splicing
- Auto web alignment
- Air extraction
- Air jet / mechanical gusseting
- Counting, auto collation & separation at outfeed
- Auto rejection of joint and empty packs
- No product – No bag
- Full CE mark
- Remote process diagnostics (direct connectivity)
- Extended in-plant “live production” support
- Preventive maintenance contract
- The data given below is covering two typical model for other models inquiry please contact us.
